Install the change on the horn bracket by taking away the horn bracket nut. Route the switch wiring underneath the remaining facet with the gas tank. Be sure the wiring passes underneath the bottom strap. Re-put in the battery and link the crimson and black wires in the relay harness to it.Future two Filter(s) Applied Future Site Following It in no

Use denatured alcohol to clean brake system components. sm03914 Don't use mineral-primarily based solvents (which include gasoline or paint thinner), which can deteriorate rubber sections even following assembly.ten. Put in stop protect bracket onto threaded stop of thru bolts, Inspection if Outfitted. For suitable orientation, make sure that the l

Before beginning motor, Examine for right Procedure of brake, clutch, shifter, throttle controls, right fuel and oil provide. Do not use aftermarket components and customized created entrance forks which can adversely have an effect on efficiency and dealin

The front change signals and tail lamp (with integrated rear turn alerts) are LED assemblies with no replaceable bulbs. See a Harley­Davidson seller or provider manual for assembly replacement. For appropriate alignment of entrance turn signals,�

 Any electromagnetic interference may possibly stop the fob from disarming the process. For included safety, often lock the fork and take away the ignition critical when parked. If the fob is within selection and the motorcycle is unlocked, tamperi